Posts

Post 1 to 5 of 9

0

Custom san mai Japanese style Honesuki

This is the latest knife off the bench. The blade for this Japanese style Honesuki chef's knife is made from stainless carbon san mai. The core is 80Cr V2 high carbon tool steel with 431 stainless cheeks, with a blade length of 153mm, a blade width at the heel of 43mm, a blade thickness on the spine of 3mm and the overall length of the knife is 267mm. The handle scales are made from bronze wave Raffir with red liners and are held with two… View More

0

Custom Japanese style Santoku

Here's the latest knife off the bench The blade for this custom designed Japanese style Santoku chef's knife is made from 3mm 80Cr V2 high carbon tool steel. The blade length is 195mm, the blade width is 50mm, the overall length of the knife is 335mm and the blade has had a forced mustard etch applied. The handle is a beautiful piece of Arizona desert ironwood with a buffalo horn bolster and held onto the tang by a custom made… View More

0

Frontier style Bowie

Hot off of the bench is this Frontier style Bowie The blade for this knife is made from W-1 high carbon tool steel, the blade lenght is 235mm, it is 5.5mm thick on the spine. The blade flats have been left rough forged and the primary bevels and the spine have had a forced mustard etch patina applied. The overall length of the knife is 335mm. The handle scales are made from stabilised California buckeye burr which are held with two… View More

0

San Antonio Bowie

Here's another Bowie hot off the bench. This is the original incarnation of the San Antonio style of Bowie that I make. It is styled after the famous Bill Bagwell's Hell's Belle style of combat Bowie popularised by Bill Bagwell himself. This knife has a blade made from W-1 high carbon tool steel, it is 258mm long, 5.5mm thick on the spine with an overall length of 390mm. It sports the classic Bagwell guard and a handle made from Australian… View More

0

San Antonio D-guard Bowie

This is the latest knife to come out of the shop. This is a San Antonio D-guard bowie with a two part construction hand guard, an 11" - 283mm long blade made from W-1 high carbon tool steel sporting a clay quenched Hamon and an overall length of 430mm just a tad over 17" long. It has a dyed Sambar stag handle with coined nickel silver spacers, a wrought iron bolster and a hand stitched Mexican belt loop sheath. This knife also comes with its… View More

Contact Us

Stephen Nowacki   |   Founder and Director